Operation, Care and Maintenence

HOW TO OPEN AND CLOSE A PANORAMIC DOOR 

The correct sequence of opening and closing the panels of your unit depends on the configuration you ordered, always follow the sequence every time you open or close the panels.

TO UNLOCK AND OPEN:

  1. Turn the knob and twist the handle down and the Swing Door is unlocked
  2. Swing it open outwards/Inwards, this allows the rest of the panels to slide and swing open.
  3. Slide the second panel up to the Swing Door, listen when it clicks into place (for panels fitted with a finger pull that releases the panel from the top track, simply pull down on the finger pull).
  4. Swing it open outwards and stack it next to the swing Door.
  5. Repeat the process with the remaining panels and stack them next to the panel previously open until all your panels are open.

Single Swing Door System

Door systems with a single swing door. All panels slide towards opened swing door. When each reaches the end of the opening the Magnaline™ Hardware will allow the panels to swing out against the open panel(s).

Double Swing Door System

Door systems with two swing doors. Depending on the number and of panels and the way the door was ordered, one or more of the panels will side to the left, and one or more panels will slide to the right. When each panel reaches the end of the opening the Magnaline™ Hardware will allow the panels to swing out against the open panel(s).

DO NOT TRY TO FORCE AND SWING A PANEL OPEN IN THE MIDDLE OF THE TRACK.

Panels are designed to open only when they have reached the respective end of the opening.

  • Failure to follow operation guidelines will result in damage to the system components and possible injury.
  • We recommend not leaving the panels open when not in use; in windy conditions we recommend you secure panels to prevent damage or injury.
  • Do not let anyone who doesn’t know how to operate the system open or close it, especially be careful with children. When closing the door, do not place your fingers between the panels.

CARE AND MAINTENANCE INSTRUCTIONS

It is very important you follow this required maintenance routine to ensure the proper functioning of your system, protect and to extend the life of parts and finishes.

  1. Turn the knob and twist the handle down and the Swing Door is unlocked
  2. Swing it open outwards/Inwards, this allows the rest of the panels to slide and swing open.
  3. Slide the second panel up to the Swing Door, listen when it clicks into place (for panels fitted with a finger pull that releases the panel from the top track, simply pull down on the finger pull).
  4. Swing it open outwards and stack it next to the swing Door.
  5. Repeat the process with the remaining panels and stack them next to the panel previously open until all your panels are open.